Techno Tips

1) Emergency number

The Emergency Number worldwide for Mobile is 112. If you find yourself out of coverage area of your mobile network and there is an emergency, dial 112 and the mobile will search any existing network to establish the emergency number for you, and interestingly ...this number 112 can be dialed even while the keypad is locked. Try it out.

2) Locked the keys in the car? Your car has remote keys?

This may come in handy someday. Good reason to own a cell phone: If you happen to lock your keys in the car and the spare keys are home, call someone on your cell phone. Hold your cell phone about a foot from your car door and have the other person at your home press the unlock button, holding it near the phone on their end. Your car will unlock.

Saves someone from having to drive your keys to you. Distance is no object. You could be hundreds of miles away, and if you can reach someone who has the other "remote" for your car, you can unlock the doors (or the trunk).

Editor's Note: *It works fine! We tried it out and it unlocked our car over a cell phone!"

3) Hidden Battery power

Imagine your cell battery is very low, u r expecting an important call and u don't have a charger. Nokia instrument comes with a reserve battery. To activate, press the keys *3370# your cell will restart with this reserve and the instrument will show a 50% increase in battery. This reserve will get charged when u charge your cell next time.

Caution: There is nothing like a reserve battery in nokia or any other cell phones. The code you have given (*3370#) is a pre-programmed code to change the active "speech codec". This code changes the speed codec to half rate. When half rate speech codec is active, phone uses about 50% less battery than the normal full rate speech codec, that's why the phone shows an increase in battery power. Also note that using a half-rate speech codec also reduces the voice quality

1) Start - Run - Regedit
Navigate to the following Registry key:
HKEY CURRENT USER\Control Panel\Desktop
Double click on the AutoEndTasks entry and replace the 0 with a 1 in the Value data text box
For the next two, if the dword value indicated does not exist, create it:
Double click on the WaitToKillAppTimeout entry in the right pane and change the Value data to 2000
Double click on the HungAppTimeout entry in the right pane and change the Value data to 1000
Reboot If still having a problem, make the next change:

2) HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
Right-click on WaitToKillServiceTimeout and change it to 2000

NOTE: The lowest value Windows will recognize is 1000 (1 second)

ADVISORY: While rare, the "WaitToKillService" tweak can cause problems. If an application is in the process of saving data and the associated service is stopped prematurely, the data will not be saved and may be lost.

Method 1. Click Start, Run, and type Notepad.exe. Copy the following contents to Notepad.

[Shell]
Command=2
IconFile=explorer.exe,3
[Taskbar]
Command=ToggleDesktop

Save the file as Show Desktop.scf. Now, drag the file to the Quick Launch Toolbar. (Notepad might automatically append a .txt extension to the file name. Remove this extension if present.) The file name should be Show Desktop.scf

Method 2: Click Start, Run and type the following command:

regsvr32 /n /i:U shell32.dll

The Show Desktop icon file should be available now.

This copy of Microsoft Windows XP is not genuine - Want to bypass and remove this warning ?

Windows XP Pirates have again found workaround methods to bypass the new Microsoft Anti-Piracy effort - Windows Genuine Advantage Notifications that notifies you through annoying pop-up messages if your copy of Windows is not genuine.

The WGA Notifications patch is installed if the user has opted to automatically update Windows via the Windows Update Website or if an XP user manually downloads the latest Windows updates.

End the process wgatray.exe in Windows TaskManager and restart Windows XP in safe mode. Now delete the following files:

Delete WgaTray.exe from c:\windowss\ystem32

Delete WgaTray.exe from c:\windows\system32\dllcache

Start Windows Registry editor and delete the folder "WGALOGON" located in the following location:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ Windows NT\CurrentVersion\WinlogonNotify. Delete all references in your registry to WgaTray.exe

Another alternative suggest that three files are installed Windows XP System Folder:

\WINDOWS\system32\WgaLogon.dll

\WINDOWS\system32\WgaTray.exe

\WINDOWS\system32\LegitCheckControl.dll

The wgatray.exe process makes the check for genuine windows software. You can disable WGA by removing the execute bit on WgaLogon.dll. That way, winlogon can't call it as a notification package at boot, and since WgaLogon is responsible for running and maintaining WgaTray.exe, no more tray popups either.

To change the execute bit of WgaLogon.dll, first turn off Simple File Sharing. Now right click the file in Windows Explorer and open the Security Tab. Hit the Advanced button, uncheck the Inherit box at the bottom, hit the Copy button, then hit OK. Go through each listed user/group and remove the "Read & Execute" permission for that file, leaving the "Read" permission as-is.

Hit OK to apply the permission changes and close the file properties dialog. Restart the machine. You can now turn "Use simple file sharing" back on, if you want.

A third alternative posted on the internet suggest that users clear the content of file data.dat located in the following directory:

C:\Documents and Settings\All Users\Application Data\Windows Genuine Advantage\data

Save the data.dat empty file and change the attributes to "Read Only" - Restart you computer. Or start your PC in Safe Mode and delete the following files from Windows system32 folder - wgalogon.dll spmgs.dll wgatray.exe The WGA setup file is in C:\WINDOWS\SoftwareDistribution\ Download\6c4788c9549d437e76e1773a7639582a

If you don't use "Fast User Switching", you can disable the Windows XP Welcome Screen if you are logged in as an Administrator. This will remove the initial WGA Warning Screen:

1. Click on Start -> Control Panel ->User Accounts

2. Click on "Change the way users log on or off"

3. Uncheck "Use the Welcome Screen" - Choose Apply

4. Close the User Accounts window and the Control Panel

5. The next time you reboot your computer, the classic login prompt will be used

To enable Fast User Switching, you must also enable the Use the Welcome screen option. Also, Fast User Switching cannot be used when Offline Files are enabled.

None of these methods are guaranteed to work and people are just experimenting. Meanwhile Microsoft is not willing to relent to crackers this time and are planning to release an update of WGADiag2.exe utility in the next few days.

WGADiag2 will also fix the problem with registry key permissions may cause the installation of Windows Genuine Advantage Notifications KB905474 to fail from Windows Update:

Here's a manual fix provided by Microsoft. These permissions can be repaired using Registry Editor as follows:

1. Click Start, and then click Run

2. In the Open box, type regedit, and then click OK

3. Expand HKEY_CLASSES_ROOT

4. Locate the subkey HKEY_CLASSES_ROOT\LegitCheckControl.LegitCheck

5. Right-click the subkey and select Permissions….

6. Ensure that Administrators allowed Full Control permission

7. Repeat steps 3-6 for the subkey

HKEY_CLASSES_ROOT\LegitCheckControl.LegitCheck.1

In case of user password boot the pc in safemode by pressing the F8 key and then selecting the Safe Mode option. You can now logon as an administrator and XP wont prompt for the password. Incase of an administrator account try rebooting the pc in DOS. access C:\Windows\system32\config\sam . Rename SAM as SAM.mj
Now XP wont ask for password next time You Login. Also

Go to the cmd prompt .
Type net user *.
It will list all the users.
Again type net user "administrator" or the name of the administrator "name" *.
e.g.: net user aaaaaa *(where aaaaaa is the name).
It will ask for the password.
Type the password and there you are done.
Logging In As Administrator:

Hold the Ctrl-Alt key and press Del twice. This will bring up the normal login and you can log on as Administrator.

To unhide the Administrator account so it does show up:

Start Regedit

Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList

Unhide the Administrator key by giving it a value of 1